How To Spool A Spinning Reel: A Beginner’s Essential Skill

Once you have tied the fishing knot of your choice, clip the tag end of the line. Leaving excess line from the tag end will lead to problems later while fishing. If you get a lot of twists in your line, take the lure off and let a lot of line out behind the boat. It does help, if your line is twisted after it goes on the reel. Take the real spool off and soak the line in warm water for about 10 minutes.

If the drag is too tight, the line might break because of too much tension. On the other hand, if the drag is too loose, there’s little tension in the fish’s mouth, allowing the fish to get off the hook. To remedy this line twisting, you can pull some lines off from your spinning reel and then flip the filler spool.

Embed this guide

A way to have a successful catch depends on how well you have assembled your equipment. You may not be able to master it on your first try, but as long as you’ll have the patience to learn it, you will surely reap the benefits of it. What’s the rod you used,what’s it casting weight,lenght… The type of bait you should use also depends on what you are fishing for.

Nothing is worse than being on the water, catching fish, and then suffering from an equipment disaster. But the truth is, most of these disasters are created by the angler themselves. As you reel, you should see the line coming off the spool in the same direction.

The one exception to this rule is when you want to use braid as your primary line with a fluorocarbon leader. This minimizes line stretch as well as line twist, and allows you to change just a limited section of line each day while your main line stays supple for months. You can use a leader as short as 7 or 8 feet, or up to slightly longer than your longest cast for this process.

Tools to Help You Load a Spinning Reel

Follow the same general practices as spooling a spinning reel to keep tension during spooling. Doing this will help to reduce line memory and will make it more manageable. Also, like spooling a baitcast reel, keeping tension on the line is crucial. This dramatically helps with casting and preventing any tangles or loops developing, which are often called wind knots. Once You have collected everything let’s start the step by step process of spooling a spinning fishing reel. If you are a beginner angler a few issues related to fishing may discourage you from this wonderful pastime activity.

As long as the line goes on with a minimum of twist, it does not need to be soaked in warm water. Tie the fly line to the leader line if you are adding it. In case you are adding leader line, take the end of the fly line and tie it to the end of the leader line. Another Albright knot works here, but a nail knot leads to a smoother line.

You can also simply run it through the final big loop nearest the reel and then thread it up through the rod when finished. While most premium lines are fine by themselves out of the package , some additives may help performance. If you want to ensure the process goes quickly and smoothly, enlist someone to help you. If you’re dealing with a bunch of reels (before our Mexico trips, I’ll often unspool and re-spool up to 15 for me and my wife combined), this is a time-consuming process. Hell, I think that’s half of the reason some people have kids—to have someone hold the pencil through the middle of the spool and apply tension. Then again, once you get into a rhythm, there’s no reason you can’t do this on your own in front of the TV.

Restringing a spinning reel is slightly different than restringing bait caster reels. This step describes the basic mechanics of reeling in the line. However, there are many different ways that you can reel in. You can reel in fast or slow, you can reel in at a constant speed or you can jerk the bait in at fast and slow intervals and you can reel with the rod tip up or down, just to name a few. There is no perfect way to account for all of these variables, as the fish will prefer different methods throughout the year, month, day and sometimes even hour.