How to Put Fishing Line on a Reel: A Step-by-Step Guide

The advantage is backlash-free casting and friction-free drops. As the bail winds the line, the line can twist leading to loops and knots. Avoiding a mess requires properly adding line to the spool.

If you do overfill, your line will jump off the spool when you cast and you’ll have a mess. Leave at least a 1/8 inch gap between the line and the lip of the spool. Hold your gloved hand along the rod, making sure your thumb and index finger are pinching the line snugly. Make sure you actually need to use braided fishing line and aren’t just defaulting to it without putting some thought into it. The easiest way to do this is to have a friend hold the spool a short distance away from you, or to simply place the spool on the ground in front of you while you spool up.

Before tying braided line to a spinning or casting reel, wrap a piece of electrical tape one time around the spool to keep the slippery line from spinning under pressure. Another solution to this is to use a main line of braid, with some length of fluorocarbon or monofilament leader. The braid is much less negatively affected by line twist, and you can easily and inexpensively change out the leader every day, or multiple times a day if you like.

Part 3 of 3:Spooling Your Reel

Once everything looks OK, make your first few casts smooth and relatively gentle—you don’t need to booger up a freshly-spooled reel before you have a chance to winch on some fish. Check your drag again, too, so that He-Man hookset doesn’t break it. If you have any doubt that the line is non-twisted, or spooled unevenly, let some out behind the boat with a lure tied on and then reel it back in straight. In fact, that’s how some people spool their line on in the first place, using the natural tension of the water’s surface.

What’s the rod you used,what’s it casting weight,lenght… At home both in open water and in the frozen tundra, 13 Fishing Kalon O Spinning Reels are performance-proven and tested by the most rugged and rowdy anglers we know. Braid and fluorocarbon present potential issues of their own. With the former, if your line is packed unevenly, you’re going to end up with nasty backlashes as various layers get intertwined. With the latter, if the layers of line are across one another in any way, the fluoro may cut itself.

DIY Line Spooler

Bring it back down through the loop and pull the the lines tight. Fly fishing line uses at least 2 different types of line. You’ll need to get a spool of backing and a spool of fishing line. For a stronger line that catches more fish, invest in leader line and tipping.Backing line is the heaviest and cheapest type. Get some marked with a weight of 20 to 30 lb (9.1 to 13.6 kg). Get a pair of scissors and snip the line beyond the tip’s end.

Make sure that you pack the braid tight when you are spooling it. It is thinner in comparison to a mono line and will dig in itself otherwise. If it succeeds in digging into the layers, your casting performance will take a hit, and you can fish without generating annoying knots. When spooling a baitcast reel, one of the most important things to keep in mind is maintaining tension as you add line to the reel. This will help to keep the line even and the tight on the spool, which will significantly help with casting and overall reel performance. Simply wrap the line twice around the reel spool and secure it with an overhand knot.