This makes the reel much easier to handle when taking small parts off. Also, we like to work on a white towel placed on the workbench. There will be some small, easily lost parts removed, and little parts seem to stay put better on a towel than a hard surface. Follow KastKing to keep up on giveaways, fishing tips and new products. Follow this process for cleaning a fishing reel at least once a year. If you get skunked, at least you won’t be able to blame your reel.
Keeping reels clean – Ontario OUT of DOORS – Ontario OUT of Doors
Keeping reels clean – Ontario OUT of DOORS.
Posted: Fri, 18 Mar 2022 07:00:00 GMT [source]
Also apply tiny amounts on the inner side of the screw cap, and inside its hole. Put a drop of oil into each side of the flipping mechanism where the bail meets the assembly. Flip the bail back and forth a few times to let the oil seep in. Wet a corner in the soapy water, wring out the excess and gently wipe down the rod blank, guides and fittings. Make sure that all visible salt and sand residues are removed. Gently repeat the procedure with a dry corner of the towelling to remove any soapy water that remains.
Step 4: Grease the Gears
Over lubricating will kill the bearings performance in a casting reel. Use a light drop of a low viscosity lubrication such as our High Speed Oil. For a thicker lubrication you can also use our Reel Power or Grease Power lubrication. If you are using a shielded bearing or an orange seal bearing you can apply the oil to the bearing with the seals/shields intact. If you are using a contact sealed bearing or grease you will need to remove the seals/shields to apply the lubrication.
Spread around a small dab of grease in the bottom and side of the socket that the bearing mounts in, before putting the bearing back in. It will not only aid in installing the bearing back into the frame , but will also preclude corrosion between dissimilar socket and bearing metals. If you’ve ever had to remove a pinion bearing that has been corroded into its bearing mount, you’ll appreciate this tip. It’s also not advisable to mix different types or brands of grease or oils, since it can have adverse and unpredictable effects. Some of these effects include reduction in lubricating properties, change in viscosity, additives can be diluted, and thickeners can harden or bleed. If a new brand of lubricant is to be used, manufacturers recommend that components should be cleaned to completely remove the old lubricant.
Many reel greases on the market today have additives specifically designed to prevent chemical attack of metal components due to seawater. This spinning reel maintenance procedure might seem time-consuming and tedious, but if you do it once a year, your reel will last a long, long time. And you’d be amazed at how much better a clean, well-lubricated spinning reel casts and brings in fish, which adds up to a more enjoyable experience on the water. One universal tip that does apply to all spinning reels, however, is to secure your fishing line before removing the spool to avoid chaotic line tangles. Use a piece of masking tape to secure the line on the spool or remove the line altogether and store it on a separate spool.
Follow these steps to clean and maintain your fishing reels properly. I don’t know where the oil goes when you fish with the reel for a while and then remove the handle and/or the side cap for a look/see – is there a little oil leprechaun? If you have some handy go ahead and use it to lube your reels.
become projectiles from poorly fitted bearings.
Use tiny amounts as excess grease may absorb dirt and hamper smooth movement. Please notethat instead of using oil and grease separately, you may use the widely available 3 in 1 oil to lubricate the metal parts. Also, there are several Reel Oiling Kits on the market that require no, or very little, additional equipment. Before cleaning the reel ensure that the drag mechanism is done up tightly.
After every fishing trip it is wise to do basic maintenance. Clean your reel with a soft cloth and remove sand, dust and other dirt without pushing hard. Eventually you can rinse your reel with cold fresh tap water, but do not sub-merge the reel under water.
Bonny Fryer has always been interested in animals, even since she was born. This interest led her to get a degree in Veterinary Medicine and start working as a veterinarian when she was only 22 years old. She is now 44 years old and still works as a veterinarian. She loves her job and finds it very fulfilling to help animals stay healthy and happy.